The Curt Trailer Hitch Receiver part # C13194 comes with all of the hardware you will need for installation including the fish wires you mentioned. I have linked an installation video for you to check out that will show you the step by step process including the use of the fish wires. Check it out. view full answer...
Yes, the Replacement Cover for TruXedo Lo Pro Soft Roll-up Tonneau Covers like part # TX546601-CVR all have the hook and loop fasteners sewn in. view full answer...
Yes, the 6 bolts and washers are included with the Curt trailer hitch fits the 2008 Nissan Armada, part # 13188.
I've linked the install details and an install video we did on a 2010. The process is the same on your 2008.
If you're going to be towing with the Nissan and need trailer wiring as well the 4-way I recommend to power the trailer's lights is part # C59496.
Then for a ball mount we have a kit that might work for you part # 989900. view full answer...
The CE Smith Keel Roller for Boat Trailers - PVC - 10" Long - 5/8" Shaft - Amber # CE29518 does not come with the shaft and pal nuts. I recommend using the Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 11" x 5/8" # CE10726A for those components and then you can use a bracket like # CE10500G. view full answer...
Yes it does! The Let's Go Aero ArcHaus Camping Tent part # SAR024-031 includes both the ArcHaus Camping tent as well as the clip on screen room. You will not have to add it to your order. view full answer...
The Furrion Chill HE RV Air Conditioner System - Mutli Zone - 15,000 Btu - LED - White # FR67FJ comes with wall-mounted thermostats so you don't have to reach up to the air distribution box to make adjustments, but it doesn't have the ability to connect wirelessly via Bluetooth or through an app.
Because of this I recommend sticking it out with the Furrion system since you're able to control both AC units from the thermostat.
Attached is a review video for you to check out. view full answer...
Retainers are not included with the Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers # MA10-20121.
This part comes with just the screen, which will snap into the vent cover. view full answer...
As seen in the linked video, the # 37207-30405 regulator bracket is indeed included with the # 37230BL JR Products propane tank holder. view full answer...
Your Draw Tite hitch part # 65046 most likely did come with install hardware but it's pretty easy to miss it. Check in the hitch opening and in the crossbeam tubing. A lot of times it's stuffed pretty far in there and difficult to see. view full answer...
The Curt SecureLatch Lunette Ring with 8-Position Adjustable Channel # CU49FR does come with the hardware needed to attach the lunette ring to the channel. It is 3 bolts, 3 nuts and 6 washers. The picture below shows every piece you would receive.
If you need additional bolts you get get the Curt Channel-Mount Coupler Hardware Kit # C25388 which will come with two additional bolts and all hardware.
The bolts are 5/8" Diameter x 4-3/4" long Grade 8 hex bolts. view full answer...
The Curt hitch part # C13152 that you referenced comes with 4 carriage bolts 1/2-13 x 4 1/2, 4 flange nuts HFN 1213, GR8, 4 hex bolts M10 - 1.25 x 25 and four 3/8 inch conical toothed washers. Plus a 11GA. (.1196) SPACER PLATE.
We sell the replacement hardware for this hitch (and all of the hitches we carry) as part # RHK. view full answer...
The wire that runs to the vehicle battery that comes with the Curt trailer wiring harness part # C56407 that you referenced is 12 gauge. view full answer...
Yes. You can use the Replacement Planetary Gearbox Kit # BD500330 to turn your single speed Bulldog jack into a 2-speed jack. You may have to drill 4 holes to mate the gearbox up with your mounting plate, but this would be the only modification required and will give you a jack similar to the Bulldog Square 2-Speed Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs # BD183802 view full answer...
The Curt Trailer Hitch Receiver part # C11831 is the only available trailer hitch option for a 2006 Saab 9-5. It does not come with any trailer wiring or ball mounts/hitch balls because not all those who use a trailer hitch do so for towing. That said, we do have all these parts you need. The Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236 is what you need to operate the trailer lights and the Curt Class II Drawbar part # C45521, Curt Class I and II Pin... view full answer...
The Replacement Pro Series Trunnion Bar # 58344 is sold as a single bar, so if you need to replace both trunnion spring bars on your weight distribution system you will need to order two.
This bar is a replacement for one of the bars supplied in a 600-lb tongue weight hitch system. view full answer...
The Westin grille guard # 57-2365 does not having mounting tabs for additional lights. The holes that would normally be there to add additional lights are being used to hold the mesh part of the HDX.
To add additional lights you can use the universal light clamps, # 57-0005. view full answer...
The Classic Accessories Wheel Covers you referenced, part # 052963762501 includes two covers that will fit around tires ranging from 27 to 30 inches in diameter. view full answer...
I believe you are referring to the portion of the awning that slides into the track that mounts on the RV. Yes, that does come with the Solera 8.5' Slider (Slide-Topper) in White w/ White Hardware # LCV000163289. view full answer...